WI-1010 - Preventative Maintenance

• Wipe down the machine. Refer to WI-1006 - Cleaners and Lubricants for more information.

• Brush all 4 upright pulleys. Refer to WI-1011 – Brushing the Upright Pulleys for more information.

Biweekly or 200,000 feet climbed

• Wipe debris from the upright tracks. Refer to WI-1012 – Wiping the Upright Tracks for more information.
• Check that the machine is level

Monthly or  400,000 feet climbed

• Perform actions for biweekly interval
• Cycle power - disconnect power at the base, then reconnect power
• Check that:
  • Pedal straps are in good condition
  • Bottle holder is secure and in good condition
  • Handles adjust easily
  • There are no abnormal noises at all resistance levels
  • Maximum reach is 20 inches
  • Resistance levels 1 - 11 display on screen
  • Physical resistance changes from 1 – 11

Quarterly or 1.25 million feet climbed

• Perform actions for biweekly and monthly intervals
• Check upright belt tension
• Clean and grease the track on the handle carriages
• Check and tighten:
  • Dip bar bolts
  • U-base bolts
  • Upright ankle bolts
• Remove and inspect pedal bolts for wear

Semi-annual or 2.5 million feet climbed

• Perform actions for biweekly, monthly, and quarterly intervals
• Check that flywheels and calipers are aligned
• Check and tighten:
  • Console drive system front and rear mounting bolts
  • Knob housing and fan bolts
  • Actuator mounting bolts, link arm bolts, guide rod bolts
  • Clean fan
  • Grease jaw couplers and spiders

Annual or 5 million feet climbed

• Perform actions for biweekly, monthly, quarterly, and semi-annual intervals
• Check that decals are in good condition and legible